YT-2500SM Spindle motor can be from 15/20 HP to upgrade 20/25 HP with high torque.

The YT-2500SM can be equipped with BT-40 Armless 20 tools / Arm type 24 tools.
It also can be changed to the BT-50 Armless 16 Tools / Arm type 24 Tools.

The high-quality auto lubricator system can make sure the guide ways lubrication. And there is no service problem as well.

The YT-2500SM Y standard travel is 850mm, but we can be extended the Y-axis travel to 1,000mm.
It is very few C-type CNC milling Y-axis travel can be 1,000 mm. It is a special design for some jobs.
Also, this machine has 2 boxes way and 2 support guide ways. It makes the machine has good accuracy. But it is suitable for 2D machining, not 3D machining.

It is a special design, there are two gear heads to consist of the universal head. When the CNC Milling changes the spindle to be the universal gear milling head.
The machine can be milled at any angle of a workpiece. And then it is the BT-50 gear milling head, which is suitable for heavy milling jobs.

YT-2500SM can be equipped with BT-40/BT-50 spindle and ATC Automatic Tools Changer. For that reason, the both BT-40/BT-50 cutting tools are available for it.

Young Tech electricity cabinet all components are used European standard VDI approval.
The connector and terminal for electricity with European Standard. It will be safe and reliable. It is almost without any service problems.

Such a Bed Type of CNC Milling machine is a special design for longer workpiece milling jobs. This machine has an X-axis travel of 2500mm, and it is suitable for light and general machining is required. But it is not for 3D mold machining.
You can see in the video that we put a long bar on the table for the drilling job because the table size is 2845X762mm, but it can not load very heavy workpieces, the maximum loading is 1,800~2,000 Kgs.

The YT-2500SM machine can be an optional 4-axis rotary table.
And we provide very high quality and accuracy within 10 seconds rotary table. It is much better than the general rotary table accuracy of 15 seconds.

The YL-74 machine is very high rigidity machine you can see the Video has shown the cutting from rough to finish and tapper cutting process. It can see the machine with good performance.

The machine frame structure has high rigidity design include the front back side frame structures and the design with computer Analysis.

Young Tech CNC Lathe machines are heavy cutting design. So, the machine frame structure has high rigidity design and combine with powerful and high torque motors, it can be assured that the machine has outstanding performance.

YL-51L & YL-65L are spindle nose A2-6, spindle 4,200 rpm.
YL-74, YL-74L12 are spindle nose A2-8, spindle 3,000 rpm
YL-92, YL-92L12, YL-92L16 are spindle nose A2-8, spindle 2,500 rpm.

The Spindle Chuck has 8 inches, 10 inches, 12 inches for different size of machine.The 8 inches, 10 inches chucks will equip with 10 tools turret.The 12 inches chuck will equip with 12 tools turret.Those tools shank has square one size 25mm, round one size 40mm.

All components are with European VDE approval standard. It can be assured the PCBS and components are working more than 10 years without service problems.All cables and wires are high reliability and safety. There are almost without any service issue in the connections problem of cables and wires.

Young Tech CNC Lathe machines are heavy cutting design. So, the machine frame structure has high rigidity design and combine with powerful and high torque motors, it can be assured that the machine has outstanding performance.

8”, 10”, 12” 3 Jaws Hydraulic spindle chuck.

The Spindle motor with IP series high torque motor, the IP motor equip with Young Tech CNC Lathe machine can meet heavy cutting requirements.

The 2HP hydraulic pump can supply the hydraulic oil to spindle chuck & Turret, tailstock etc.

The Belt type conveyor can be disposal the different type cutting chips automatically. It can help the CNC Lathe machine has much efficiency working.

The water recycle tank, it can recycle the machine cutting water. And the 2HP water pump will provide the powerful flushing water to make sure to clean up the cutting chips during the Lathe machining.